Photo: tandtlegacymetals.com
Get prices and lead times from T&T Legacy Metals
What you can buy
Hot-rolled
Hot-rolled pickled & oiled
Cold-rolled
Galvanized
Galvannealed
Stainless steel
Aluminum
High-strength steel
- Plate
- Laser & plasma-cut parts
Sizes
- Carbon structurals
- Angle, channel, wide flange and I-beam in A36, A992, A572 Gr 50, A709 and A588 weathering steel; rebar and wire mesh
- Sheet and plate
- Cold-rolled A1008 24–10 ga; galvanized and galvannealed 26–10 ga; hot-rolled P&O 16 ga–1/4"; A36, A572, A516 Gr 70 PVQ, AR235–AR500 abrasion-resistant and diamond tread plate
- Tube, pipe and bar
- ERW, seamless and DOM tubing, Sch 40 and 80 pipe; 4140, 4150, 8620 alloy bar, cold-finished 1018 and TGP 1045 shafting, hot-rolled flats, rounds and squares
- Stainless and aluminum
- 304/304L and 316/316L shapes, sheet, plate, tube and pipe; 6061, 6063, 3003 and 5052 aluminum shapes, sheet, plate, tooling plate and tread plate
- Saw cutting
- Amada HFA250W band saw 9" x 9" bar (±0.010"); Marvel E380PC3 15" x 20" with 60° miter; Amada CMB 150 cold saw; structural lengths up to 45'
- Plasma and oxygen burning
- Koike table up to 96" x 240"; plasma to 2" carbon and 1.5" stainless and aluminum; oxy-fuel to 4" carbon steel
- Waterjet cutting
- Flow I-6012, up to 6" thick x 72" x 144" sheet, plate and tube
- Drilling and milling
- Milltronics RH30 for drilling, milling, tapping, beveling, slots and keyways; Geka 70-ton ironworker; mag drills
- Partner services
- Laser cutting, bending and forming, machining, grinding, thermal processing, welding, blasting, priming and painting through partners
- Inventory programs
- On-site stocking programs and use-as-you-consume billing for qualified high-volume customers
About T&T Legacy Metals
T&T Legacy Metals is a family-owned, veteran-owned metals service center in Grand Island, New York, near Buffalo, serving Western and Central New York. It opened in the area in 2020 and now runs a 23,500 sq ft shop stocking carbon structurals, sheet, plate, tubing, pipe, bar, grating, stainless and aluminum, with in-house saw cutting, plasma and oxygen burning, waterjet cutting, drilling and milling, and no minimum order.
- Processing
- Plasma cutting, Sawing, Warehousing
- Ownership
- Family-owned, veteran-owned
Location
Grand Island, NY
Headquarters
Photos
Prices and lead times from T&T Legacy Metals, without the phone tag.