Get prices and lead times from Swepco Tube
What you can buy
Stainless steel
Aluminum
- Cut-to-length sheet
- Plate
- Laser & plasma-cut parts
- Tube & pipe
Sizes
- Pipe
- 4" through 36" IPS, schedule 5 through 160; lengths to 40' with a single longitudinal seam and no circumferential weld
- Tubing and cylinders
- 5" to 48" OD tubing, walls 0.065" to 3"; rolled and welded cylinders up to 96" diameter; autogenous welds through 2" wall to ASME SA-312
- Structural tubing
- Squares 3" x 3" to 24" x 24" and rectangles 2" x 4" to 23" x 24", walls 0.065" to 1"; single seam through 12" x 1/2" wall via the Shapemaster forming system
- Alloys
- More than 140 alloys, including 300-series stainless, duplex, 6-moly, alloy 20, C-276, C-22 and other nickel alloys, titanium, zirconium, tantalum, aluminum and copper alloys
- Coil and plate preparation
- Two cut-to-length lines shearing to 40' from coil up to 60" wide, 0.500" thick and 20,000 lb; two plate edge planers, 20' and 30'
- Forming and welding
- 350- to 3,000-ton press brakes; heavy-wall pipe to 42" OD and 3" wall; Syncro Weld simultaneous OD/ID GTAW to 24" OD with in-line arc vision; Dyna Weld GTAW to 72" OD and 2" wall
- Heat treat and finishing
- Two batch furnaces for full solution anneal and water quench up to 44" OD x 42'; 150- to 750-ton sizing presses; six-tank nitric/hydrofluoric pickle-and-passivate line for 45' lengths with acid regeneration
- Testing
- Three in-motion and static radiography facilities, ID boroscope, laboratory testing including liquid penetrant, ultrasonic, Charpy impact and corrosion testing
- Special Products Division
- Spooling, fabricated fittings, seam welding, machining, special cutting and quick-turn production with no mill minimums
- Stock
- Inventory of stainless and alloy pipe 4" through 30" in three stock yards totaling about 4 acres; commodity 304/304L tubing 5" to 10" OD
About Swepco Tube
Swepco Tube is a privately held maker of welded stainless steel and high-alloy pipe and tubing in Clifton, New Jersey, founded in 1949. It cuts purchased coil and plate to length, forms it on press brakes up to 3,000 tons and welds single-seam pipe from 4" to 36" IPS, tubing to 48" OD, cylinders to 96" and square and rectangular structural tube, in stainless, duplex, 6-moly, nickel alloys, titanium and other alloys, with annealing, pickling, radiography and fabrication in-house.
- Processing
- Cut-to-length, Shearing, Pickling, Plasma cutting, Sawing, Tube making, Toll processing, Warehousing
- Industries served
- Chemical, Petrochemical, Power generation, Oil and gas, Biofuels, Architectural, Nuclear
- Certifications
- ASME Section I certificate holder, ASME Section III certificate holder, ASME Section VIII certificate holder
- Ownership
- Privately held
Location
Clifton, NJ
Headquarters
Prices and lead times from Swepco Tube, without the phone tag.