Photo: steelscape.com
Get prices and lead times from Steelscape
What you can buy
Cold-rolled
Galvanized
Galvalume
Pre-painted
Aluminum
- Slit coil
- Cut-to-length sheet
- Precision strip
Sizes
- ZINCALUME coating (Rancho Cucamonga)
- 55% aluminum / 45% zinc; 0.012"–0.0356" thick, 28"–50" wide; AZ35, AZ50, AZ55, AZ60; input coils up to 55,000 lb
- TruZinc galvanizing (Kalama)
- Hot-dip galvanized; 0.0120"–0.0470" thick, 28"–51" wide; G30 to G125; coils up to 56,000 lb
- Paint line (Kalama)
- Steel 0.0115"–0.039" thick, 26"–49.5" wide; output coils up to 33,000 lb; minimum run 1,600 ft
- Paint line (Rancho Cucamonga)
- Steel 0.0130"–0.0460" and aluminum 0.0320"–0.0630" thick, 28"–52" wide; substrates include galvanized, ZINCALUME, cold-rolled, aluminum, stainless and electrogalvanized
- Paint systems
- Acrylic, polyester, SMP, fluorocarbon (including Natural Matte PVDF) and plastisol finish coats; urethane, epoxy and polyester primers
- Slitting
- Kalama: 0.010"–0.050" thick, 16"–52" wide, up to 24 mults, 55,000 lb coils. Rancho Cucamonga: 12"–52" wide, up to 40 mults on light gauge
- Cut-to-length (Kalama)
- 0.010"–0.050" bare, 12"–60" wide, 36"–144" lengths, pallets up to 5,000 lb
- Embossing (Rancho Cucamonga)
- Non-directional stucco pattern on steel 0.0180"–0.0296" and aluminum 0.0320"–0.040" thick, up to 48.5" wide
- Toll coating
- Coats customer-supplied base metal
About Steelscape
Steelscape - Where Steel Gets Its Start
Steelscape is a metallic-coated and pre-painted steel producer with plants in Rancho Cucamonga, California, and Kalama, Washington, operating since 1968. It pickles and cold-rolls steel, coats it as TruZinc galvanized and ZINCALUME aluminum-zinc coil, paints steel and aluminum on continuous coil coating lines, and slits, cuts to length and embosses coil, mainly for metal roofing, siding and light-gauge construction.
- Processing
- Slitting, Cut-to-length, Cold rolling, Pickling, Coil coating, Toll processing
- Industries served
- Metal roofing and siding, Light-gauge construction, Commercial building, Residential building
- Ownership
- Part of NS BlueScope Coated Products (BlueScope)
Locations
Rancho Cucamonga, CA
Headquarters
Kalama, WA
TruZinc galvanizing line, paint line, slitting and cut-to-length
Photos
In the news
Prices and lead times from Steelscape, without the phone tag.