Photo: steelservicesinc.com
Get prices and lead times from Steel Services
What you can buy
Hot-rolled
Cold-rolled
Galvanized
Stainless steel
Aluminum
High-strength steel
- Cut-to-length sheet
- Plate
- Laser & plasma-cut parts
Sizes
- Plasma and oxy-fuel (CSI Kodiak)
- Hypertherm XPR plasma up to 6.25" thick and oxy-fuel up to 24" thick; cutting widths to 30 ft and lengths to 250 ft; up to 12 torches at once
- Plasma (AKS Dura-Kut)
- Plates up to 30 ft wide and 28 ft long, +/-0.006" motion accuracy, 5-axis bevel head to +/-45 degrees, integrated tube and pipe cutting
- Angle processing (Peddinghaus Anglemaster HD)
- Angle up to 8" x 8" x 1" and flat bar up to 12" x 1"; up to three hole sizes per leg in one pass; 515-ton single-cut shear; carbide scribing
- Band sawing
- Hydmech H-32A with 32" x 32" capacity; Hydmech M-20A-120 with 20" x 30" capacity, 8,000 lb load and miters to 60 degrees; Amada VT5063MW tilt-frame saw mitering to 60 degrees left and right
- Shearing
- Sheets, plates, flats, rounds, angles and rebar, from light gauge to 1" plate and plates up to 12 ft wide
- Punching
- Holes 1/4" to 1-1/2" diameter in material up to 1" thick in angles, clips and beams
- Drilling
- Holes up to 2" diameter and 6" deep in a single pass
- Splitting
- Split tees and angles flame-cut from wide flange and channel 4" and deeper; straightening available
- Slag removal
- Timesavers 22 Series Hammerhead machines for automated deburring and slag removal of cut parts
- Plate grades
- A36, A572 and HSLA plate, dual- and triple-certified ABS/MIL-S-22698C ship plate, A516 Grade 70 pressure vessel plate, AR235/AR400 abrasion-resistant and cladded wear plate, floor plate
- Other stock
- Hot-rolled, cold-rolled and galvanized sheet; structural angles, beams, channels and tees; hot-rolled and cold-finished bar; rebar and wire mesh; square, rectangular and round tube; black and galvanized pipe; expanded metal and grating; stainless and aluminum
About Steel Services
Plasma Cutting
Steel Services is a Virginia steel service center founded in Richmond in 1946, with service centers in Ashland, Roanoke and Norfolk. It stocks carbon plate and sheet, ABS and MIL-SPEC ship plate, abrasion-resistant and high-strength plate, structurals, bar, tube, pipe, grating, galvanized, stainless and aluminum, and processes them with plasma and oxy-fuel cutting, band sawing, shearing, angle punching, beam splitting and drilling for fabricators, OEMs, job shops and shipyards across the Mid-Atlantic.
- Processing
- Shearing, Plasma cutting, Sawing, Warehousing
- Industries served
- Naval and commercial shipbuilding, Structural fabrication, Job shops, OEMs
- Ownership
- Family-led, fourth generation
Locations
Richmond, VA
Headquarters
Ashland, VA
Richmond service center, established 1979; plasma and oxy-fuel cutting, tube cutting, sawing, angle processing
Roanoke, VA
Service center, established 1952; plasma and oxy-fuel cutting, sawing; serves southwest Virginia, West Virginia, North Carolina and Tennessee
Norfolk, VA
Service center, established 1962; ABS and MIL-SPEC shipbuilding plate, plasma and oxy-fuel cutting, sawing
Photos
In the news
Prices and lead times from Steel Services, without the phone tag.