Photo: sandmeyersteel.com
Get prices and lead times from Sandmeyer Steel
What you can buy
Stainless steel
- Plate
- Laser & plasma-cut parts
Sizes
- Inventory
- About 15 million lb (7,500 tons) of stainless, duplex, nickel alloy and titanium plate in 38 grades, at a single site
- Stainless plate sizes
- 34 thicknesses from 0.1875" (4.8 mm) to 6.0" (152.4 mm), including 0.250" steps from 2.0" to 6.0"; widths 48" to 120"
- Nickel alloy and titanium plate
- Alloys 200/201, 330, 400, 600, 625, 800H/800HT, 825, C-276 and Invar 36 up to 96" wide; titanium Grade 2/2H
- Stainless and duplex grades
- 304/304L/304H, 316/316L/316H, 303, 309, 310, 317L, 317LMN, 321, 347, 410, 410S, 17-4PH, 6MO, 904L; duplex 2101, 2205, 2304 and 2507; cobalt-restricted nuclear 304L and 304H
- Abrasive waterjet cutting
- Four machines with eight heads and 60,000 psi pumps; parts up to 6.0" thick and pattern sizes up to 158" x 288"; separate 5-axis waterjet for contour bevels and K-bevels
- Plasma and laser cutting
- High-definition plasma through 2.0" with plasma beveling through 3.0" (+52° to -52°); 6,000 W laser through 1.25"
- Bandsaw cutting
- Plate 0.250" to 6.0" thick, cut sizes up to 124" x 274", width and length tolerance +0.125"/-0"
- Machincut rings and discs
- Machined rings and discs up to 124" OD, held to +1/16"/-0 on the OD and +0/-1/16" on the ID
- Drilling and machining
- Tubesheet and baffle drilling, tapping and counterboring; stacked drilling through 8.0"; machining up to 130", 125 RMS finish
- Grinding, rolling and heat treating
- Surface and Blanchard grinding up to 72" x 244"; rolling and forming up to 2.5" x 96" x 120"; heat treating up to 96" x 279"
- Welded pipe and tubing from plate
- 4" to 48" NPS, schedule 5 to 160, walls 0.1875" to 3"; rolled and welded cylinders up to 96" diameter; ASME Section VIII U-stamp code-welded rings
- Flattening
- Plates flattened to half of standard commercial flatness tolerance
- Testing
- Corrosion, grain size, hardness, impact, tensile and ultrasonic testing
About Sandmeyer Steel
5-Axis Abrasive Waterjet Cutting
Sandmeyer Steel Company is a family-run specialty plate supplier in Philadelphia, Pennsylvania, founded in 1952. From one site it stocks about 15 million pounds of stainless steel, duplex, nickel alloy and titanium plate in 38 grades and 34 thicknesses from 3/16" to 6", and cuts it to near-net shapes with plasma, laser, abrasive waterjet, bandsaw and Machincut machining. It serves chemical processing, nuclear, power generation, oil and gas, aerospace and shipbuilding.
- Processing
- Leveling, Laser cutting, Plasma cutting, Sawing, Polishing, Warehousing
- Industries served
- Aerospace components and composite tooling, Air pollution control, Architecture, Beverages and bottling, Chemical and petrochemical processing, Food processing, Medical tooling, Metal distribution, Military, Nuclear, Oil and gas, Ore processing, Petroleum refining, Pharmaceutical and biotechnology, Power generation, Pulp and paper, Renewable fuels, Semiconductors and vacuum products, Shipbuilding, Thermal processing, Transportation, Water and wastewater treatment
- Certifications
- ASME Section III Material Organization (QSC-619), 10 CFR 50 Appendix B, 10 CFR Part 21, NQA-1, ASME Section VIII U-stamp
- Ownership
- Family-owned
Location
Philadelphia, PA
Headquarters
Photos
Prices and lead times from Sandmeyer Steel, without the phone tag.