Photo: proteccoating.com
Get prices and lead times from PRO-TEC Coating Company
What you can buy
Cold-rolled
Galvanized
Galvannealed
High-strength steel
Sizes
- CGL1 (galvanize/galvanneal)
- GA and GI; 0.023"–0.095" thick, 36"–72.5" wide; CS, DDS, EDDS, BHS, HSLA, 590/780/980DP, TRIP and GEN3 780/980 to 1.6 mm; 600,000 tons/year
- CGL2 (galvanize/galvanneal)
- GA and GI; 0.023"–0.060" thick, 36"–65.5" wide; CS through HSLA and 590DP; 500,000 tons/year
- CGL3 (galvanize/galvanneal, started 2020)
- GA and GI; 0.023"–0.106" thick (2.3 mm max GEN3), 34.25"–65.7" wide; DP to 2.7 mm, CP, TRIP, GEN1+, Q&P and GEN3 780–980; 500,000 tons/year
- CAL (continuous annealing, started 2013)
- Uncoated cold-rolled with nickel flash; 0.023"–0.090" thick, 32"–65" wide; DP to 1470, MS to 1700, GEN3 above 980; 500,000 tons/year
- Coil handling
- Coils up to 90,000 lb at entry and exit; side-trim recoil lines with 20"–24" ID; 50-ton remote-controlled cranes and automated coil warehouses
- Surface treatments
- Oils, dry-in-place phosphate, chemical treatments (RoHS-compliant Cr3+ on CGL3) and electroplated nickel flash on the CAL
- Water reuse
- Ultrafiltration and reverse-osmosis treatment recovers up to 80% of process water from two waste streams
About PRO-TEC Coating Company
PRO-TEC Coating Company is a flat-rolled steel processor on a 1,200-acre site near Leipsic, Ohio, established in 1990. It runs three continuous hot-dip galvanizing and galvannealing lines and a continuous annealing line that turn cold-reduced coil into coated and uncoated advanced high-strength steel, with temper rolling, tension leveling and side trimming in line. Its output goes mainly to the automotive industry.
- Processing
- Leveling, Temper rolling, Edge conditioning, Coil coating, Toll processing, Warehousing
- Industries served
- Automotive
- Certifications
- IATF 16949, ISO 9001, ISO 14001, ISO/IEC 17025 (laboratory), OSHA Voluntary Protection Program (VPP)
- Ownership
- Joint venture of United States Steel Corporation and Kobe Steel, Ltd.
Location
Leipsic, OH
Headquarters
Photos
Prices and lead times from PRO-TEC Coating Company, without the phone tag.