Photo: ocmcoil.com
Get prices and lead times from Old Country Millwork
What you can buy
Galvalume
Pre-painted
Stainless steel
Aluminum
- Slit coil
- Cut-to-length sheet
Sizes
- Coating line, 48"
- Aluminum 0.024"–0.063", steel 0.012"–0.047"; coils up to 20,000 lb; 16", 20" or 24" ID; 1,400 linear ft minimum run
- Coating line, 36"
- Aluminum 0.008"–0.063", steel 0.010"–0.046", stainless 0.010"–0.043"; coils up to 10,000 lb; 850 linear ft minimum run
- Coating line, 12"
- Aluminum 0.012"–0.063", steel 0.010"–0.057", stainless 0.010"–0.043"; coils up to 5,000 lb; 850 linear ft minimum run
- Paint systems
- PVDF, SMP, polyester and epoxy; colors matched and batched in an on-site paint lab; prints and specialty finishes including K5, TimberMet, Ore/LuxOre and Midnight
- Paint warranties
- PVDF 35 years, SMP 40 years and polyester 10 years against fade, chalk, crack and peel
- Slitting
- Aluminum 0.010"–0.063", steel 0.010"–0.048"; 1.050"–49.000" wide; 10,000 lb max entry; PVC or paper protection; slit before or after painting
- Leveling and cut-to-length
- Sheets up to 56" wide and 300" long; aluminum 0.0125"–0.080", steel 32–18 gauge; coils up to 20,000 lb and 74" OD; length ±0.0625", diagonal ±0.125"; film and paper interleaving
- Embossing
- Bare and painted coil in Stucco, Cedar, Driftwood and Leather patterns
- Inventory
- AZ50 Zincalume, grade 50 and CQ, 18–30 gauge; 3105, 3003 and 3004 aluminum 0.014"–0.063"; both up to 48.25" wide; Rheinzink
About Old Country Millwork
Old Country Millwork (OCM) is a custom coil coater in Los Angeles, California, founded in 1984. It stocks mill-finish 3105, 3003 and 3004 aluminum and AZ50 Zincalume steel coil, paints aluminum, steel and stainless on three roller-coat lines with PVDF, SMP, polyester and epoxy systems, and mixes colors in its own paint lab. It also slits, embosses, levels and cuts to length for architectural sheet metal, automotive, solar, electronics and appliance manufacturers.
- Processing
- Slitting, Cut-to-length, Leveling, Coil coating
- Industries served
- Architectural sheet metal, Roofing and wall panels, Ceilings, Garage and roll-up doors, Rain gutters, Signage, Automotive, Solar, Electronics, Consumer appliance
Location
Los Angeles, CA
Headquarters
Photos
Prices and lead times from Old Country Millwork, without the phone tag.