Photo: greatsouthmetals.com
Get prices and lead times from Great South Metals
What you can buy
Hot-rolled
Cold-rolled
Galvanized
Pre-painted
- Slit coil
- Cut-to-length sheet
- Blanks
Sizes
- Slitting (60" line)
- Up to 61" incoming and 60 5/8" slit width; up to 10 cuts at 0.097"–0.100" and up to 22 cuts on light gauge; coils up to 45,000 lb; 18"–71.75" OD
- Slitting (48" line)
- Up to 48" wide; up to 8 cuts at 0.097"–0.100" and up to 22 cuts on light gauge; coils up to 23,500 lb; 18"–66" OD
- Cut-to-length
- 0.015"–0.085" thick, 17"–72" wide, 24"–126" lengths, coils up to 40,000 lb (max 0.0747" on sheets 49" and wider)
- Slit coil packaging
- Packing lines handle packages up to 10,000 lb (60" line) and 6,000 lb (48" line)
- Plant
- 85,000 sq ft in Acworth, GA, served by 20- and 25-ton overhead cranes
- Delivery
- Company truck fleet for just-in-time deliveries; orders of any size
About Great South Metals
Great South Metals is a flat-rolled steel service center in Acworth, Georgia, established in 1978 and part of Mainline Metals since 2022. From an 85,000 sq ft plant it stocks galvanized, pre-painted, cold-rolled and hot-rolled steel, runs two loop slitters and a 72-inch cut-to-length line for slitting, leveling and blanking, offers storage, and delivers just-in-time on its own truck fleet.
- Processing
- Slitting, Cut-to-length, Blanking, Leveling, Warehousing
- Ownership
- Subsidiary of Mainline Metals (acquired 2022)
Location
Acworth, GA
Headquarters
Prices and lead times from Great South Metals, without the phone tag.