Photo: web.archive.org
Get prices and lead times from General Nuclear Corporation
What you can buy
Hot-rolled
Stainless steel
High-strength steel
- Cut-to-length sheet
Sizes
- Bar stock
- Carbon, 4340 alloy, stainless, nickel-based alloys 400, K500, 600 and 625, and Haynes 25
- Sawing
- Up to 26" diameter
- Shearing
- Hydraulic shear up to 1/4" thick x 10 ft
- Turning
- Shafting 21" diameter x 81" between centers; chucking to 36" diameter; CNC turning center with 1,700 lb max spindle weight
- Milling and grinding
- Milling 36" cube or 50" x 50" plate; surface grinding 6" x 18"
- EDM
- 15 3/4" x 11 7/8"
- Welding
- GTAW and oxy-fuel, with a 1,500 lb welding positioner
- Load testing
- Up to 12 ft long and 10,000 psi pull load
- Pressing
- 500-ton press forming canopy seal rings up to 20" diameter x 0.210" thick
- Material handling
- 20-ton overhead crane in the warehouse, 2-ton cranes at machine stations, 4-ton forklift
- Quality program
- QA manual written to 10 CFR 50 Appendix B, 10 CFR Part 21, ASME B&PV Code Section III and NCA-3800, MIL-I-45208, MIL-Q-9858 and QRC-82
- Logistics
- One mile from the Pennsylvania Turnpike and I-70, with access to motor and air freight
About General Nuclear Corporation
General Nuclear Corporation is a specialty metals distributor and machine shop serving the defense and commercial nuclear industries from a 75,000-square-foot plant near New Stanton, Pennsylvania, about 35 miles east of Pittsburgh. It stocks carbon, 4340 alloy, stainless, nickel-based alloy (400, K500, 600 and 625) and Haynes 25 bar, and offers sawing, shearing, turning, milling, grinding, EDM, welding and load testing under a quality program written to 10 CFR 50 Appendix B and ASME Section III.
- Processing
- Shearing, Sawing
- Industries served
- Defense, Commercial nuclear
Location
Hunker, PA
Headquarters
Prices and lead times from General Nuclear Corporation, without the phone tag.