Photo: bridgecitysteel.com
Get prices and lead times from Bridge City Steel
What you can buy
Hot-rolled
Hot-rolled pickled & oiled
Cold-rolled
Galvanized
Stainless steel
Aluminum
High-strength steel
- Plate
- Laser & plasma-cut parts
Sizes
- Laser cutting
- Four lasers running 24 hours a day; fiber laser with a 10' x 20' table and three Amada CO2 lasers cutting mild steel up to 1-1/4"
- Plasma and flame cutting
- Plasma to 3" and oxy-fuel to 8" on an 18'-wide table, with drilling to 4" and tapping to 2-1/16" on a CAT 50 spindle
- Waterjet cutting
- 6'-8" x 13'-4" envelope, 12" Z-axis travel, Tilt-A-Jet head, tolerances +/- 0.010"
- Press brake bending
- Up to 750 tons x 24' long; 1/4" A36 x 24', 3/8" x 20', 1/2" x 14'; standard bend angle tolerance +/- 1 degree
- Products stocked
- Hot-rolled, cold-rolled, pickled and oiled and galvanized sheet; A36, A572, A514, A516, A588 (Corten), AR400 and AR500 plate; floor plate; 304 and 316 stainless; 3003, 5052 and 6061 aluminum
- Other materials cut
- Copper, bronze, brass, titanium, carbon fiber, plastics, UHMW and gasket materials on the laser and waterjet
- Facility
- 60,000 sq ft on 3 acres with two 10-ton overhead cranes; about 10 minutes from I-5
About Bridge City Steel
Bridge City Steel is a plate and sheet processor in Portland, Oregon, founded in 2006 to supply cut parts to manufacturers, fabricators and machine shops in the Pacific Northwest. From a 60,000 sq ft plant on 3 acres it carries carbon, abrasion-resistant, stainless and aluminum sheet and plate, and cuts it on fiber and CO2 lasers, a plasma and oxy-fuel plate processor and a waterjet, then drills, taps and bends parts on five CNC press brakes.
- Processing
- Laser cutting, Plasma cutting
- Industries served
- Manufacturing, Steel fabrication, Machine shops, Heavy equipment, Architectural metalwork
Location
Portland, OR
Headquarters
Photos
Prices and lead times from Bridge City Steel, without the phone tag.