Photo: andescoil.com
Get prices and lead times from Andes Coil Processors
What you can buy
Galvanized
Pre-painted
Stainless steel
Aluminum
- Slit coil
- Cut-to-length sheet
Sizes
- Slitting (all sites)
- 0.010"–0.250" thick, dimensional accuracy as tight as ±0.005", on eight slitting lines
- Slitting — Dallas, TX
- 0.015"–0.250" thick, 1.25"–72" slit widths, coils to 60,000 lb
- Slitting — Fort Worth, TX
- 0.015"–0.250" thick, 15"–62" incoming width, coils to 60,000 lb
- Slitting — Gary, IN
- 72" line: 0.035"–0.250" thick, coils to 60,000 lb
- Cut-to-length — Gary, IN
- 0.016"–0.140" thick, sheets up to 60.375" × 145"
- Cut-to-length — Lewisville, TX
- 0.035"–0.135" thick, 18"–60" wide, 30"–144" lengths, coils to 30,000 lb
- Embossing
- Non-directional stucco pattern; steel 0.010"–0.045", aluminum 0.010"–0.080", up to 40" wide
About Andes Coil Processors
Andes Coil Processors is an independent steel coil toll processor with rail-served facilities in Lewisville, Dallas and Fort Worth, Texas, and Gary, Indiana. It slits, cuts to length and embosses carbon, alloy, stainless, aluminum and pre-painted coil owned by OEMs, service centers, traders and mills, and offers warehousing, transloading and trucking.
- Processing
- Slitting, Cut-to-length, Leveling, Toll processing, Warehousing
- Industries served
- Shelving, Industrial flooring, Building products
- Ownership
- Acquired by Allison Resources in July 2026
Locations
Lewisville, TX
Headquarters
Dallas, TX
Slitting; rail-served, 54,000 sq ft under roof
Fort Worth, TX
Slitting; rail-served, 150,000 sq ft under roof
Gary, IN
Midwest Division: slitting, cut-to-length and embossing; rail-served
Photos
In the news
Prices and lead times from Andes Coil Processors, without the phone tag.