Photo: american-metals.com
Get prices and lead times from American Metals Corporation
What you can buy
Hot-rolled
Hot-rolled pickled & oiled
Cold-rolled
Stainless steel
Aluminum
High-strength steel
- Cut-to-length sheet
- Blanks
- Plate
- Laser & plasma-cut parts
Sizes
- Plate stock
- 3/16"–12" thick: A36, A572-50/65, A588, A516-70, AR235/400/500, A514, forming grades and diamond floor plate
- Sheet and coil stock
- 10 ga–1/2" coil up to 84" wide and 30–11 ga coil up to 72" wide; hot-rolled, P&O and cold-rolled
- Plate leveling (cut-to-length)
- 14 ga–1/2", 36"–84" wide, lengths to 840"
- Sheet leveling (cut-to-length)
- 30–12 ga, 36"–60" wide, lengths 12"–240"
- Blanking line
- 20 ga–3/16", 1"–24" wide, blanks 4"–288" long, coils to 10,000 lb and 60" OD
- Plate burning and drilling
- Oxy-fuel to 12" on 18' × 50' tables, high-definition plasma to 2" on 18' × 72' tables (±.030"), drilling up to 4" holes in 8" plate, beveling to 45°
- Laser cutting
- 8,000-watt fiber laser, up to 1" carbon and stainless, 80" × 160" table with automatic loading
- Sawing and shearing
- Saws to 25" high × 30" wide; shearing 28 ga–3/8" on a 16' bed
- Structural processing
- Beam and tube cambering (23'6" minimum), split tees up to 30" wide and 5/8" thick
- Pipe threading
- 4"–12" pipe, lengths to 20'
- Long products
- Wide flange W4–W40 and channel 20'–65' long; DOM, structural and ornamental tube; A53 pipe; well pipe; flat, round and square bar; expanded metal and bar grating
About American Metals Corporation
American Metals Corporation is a West Coast metals service center headquartered in Canby, Oregon, founded in 1944 as American Sheet Metal. It operates as American Steel, American Metals, Lampros Steel, Haskins Steel and Alaska Steel from nine locations in Oregon, Washington, California and Alaska. It stocks carbon plate, sheet and coil, beams, channel, bar, tube, pipe and grating, and offers plate burning, laser cutting, coil leveling, blanking, sawing, shearing, cambering and pipe threading.
- Processing
- Cut-to-length, Blanking, Shearing, Leveling, Laser cutting, Plasma cutting, Sawing, Warehousing
- Industries served
- Infrastructure, Energy, Mining, Building construction, Trailer manufacturing
- Ownership
- Subsidiary of Reliance, Inc.
Locations
Canby, OR
Headquarters
Portland, OR
Lampros Steel; structural steel shapes and saw shop
Kent, WA
American Steel service center
Spokane, WA
Haskins Steel; carbon steel and aluminum processing, 175,000 sq ft
West Sacramento, CA
American Metals service center
Fresno, CA
American Metals service center
Anchorage, AK
Alaska Steel
Fairbanks, AK
Alaska Steel
Kenai, AK
Alaska Steel
Photos
Prices and lead times from American Metals Corporation, without the phone tag.